Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Freightliner Sprinter 2500 L5-2.7L DSL TurboFACTORY OEM SERVICE PROCEDURE
Computer/Controls - Software Retrofit Information
Date: January 27, 2012
Order No.: V-B-00.00/02a
Supersedes: V-B-00.00/02, October 18, 2010
Group: 00
SUBJECT:
MY-All, Model 906
Software Retrofit Process
Software-based options and functions can now be retrofitted. The SA code designation, relevant part number and price is accessible via the Daimler After-Sales Portal. Click the top right Info-Center menu link and select PIT (Product Information Tool) After-Sales > Service > Software Retrofit: Retrofits. Or simply click search on the Home page and enter retrofit. It will be the first selection in the list of results.
Process Sequence
Check that the equipment exists in the vehicle before proceeding.
1. Place order using VIN with the corresponding part number found in the parts information section
2. Code is activated by the technical parts advisory service in Germany using Vedoc
3. Code appears in Vedoc equipment list for the vehicle
4. Activate the SA function by SCN coding the affected control unit
Process Time Order processing in the GLC usually takes approximately 5 hours. If placed before noon anticipate that the order will be processed the same day, otherwise assume with some exceptions that the order will be processed the following workday.
Process Time
Order processing in the GLC usually takes approximately 5 hours. If placed before noon anticipate that the order will be processed the same day, otherwise assume with some exceptions that the order will be processed the following workday.
Part Information with Options / Functions Available
Order No.: V-B-00.00/02a
Supersedes: V-B-00.00/02, October 18, 2010
Group: 00
SUBJECT:
MY-All, Model 906
Software Retrofit Process
Software-based options and functions can now be retrofitted. The SA code designation, relevant part number and price is accessible via the Daimler After-Sales Portal. Click the top right Info-Center menu link and select PIT (Product Information Tool) After-Sales > Service > Software Retrofit: Retrofits. Or simply click search on the Home page and enter retrofit. It will be the first selection in the list of results.
Process Sequence
Check that the equipment exists in the vehicle before proceeding.
1. Place order using VIN with the corresponding part number found in the parts information section
2. Code is activated by the technical parts advisory service in Germany using Vedoc
3. Code appears in Vedoc equipment list for the vehicle
4. Activate the SA function by SCN coding the affected control unit
Process Time Order processing in the GLC usually takes approximately 5 hours. If placed before noon anticipate that the order will be processed the same day, otherwise assume with some exceptions that the order will be processed the following workday.
Process Time
Order processing in the GLC usually takes approximately 5 hours. If placed before noon anticipate that the order will be processed the same day, otherwise assume with some exceptions that the order will be processed the following workday.
Part Information with Options / Functions Available
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.