Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2024 Ford Ranger RaptorFACTORY OEM SERVICE PROCEDURE
Seating System DTCS: Front
| DTC | Description | Action |
|---|---|---|
| B1C03:23 | Memory #1 Switch: Signal Stuck Low | GO to Pinpoint Test F |
| B1C04:23 | Memory #2 Switch: Signal Stuck Low | GO to Pinpoint Test F |
| B1C05:23 | Memory #3 Switch: Signal Stuck Low | GO to Pinpoint Test F |
| B14C3:24 | Seat Height Rear Down Switch: Signal Stuck High | GO to Pinpoint Test E |
| B14C4:24 | Seat Height Rear Up Switch: Signal Stuck High | GO to Pinpoint Test E |
| B14CE:11 | Seat Horizontal Motor Output: Circuit Short To Ground | GO to Pinpoint Test E |
| B14CE:12 | Seat Horizontal Motor Output: Circuit Short To Battery | GO to Pinpoint Test E |
| B14CE:13 | Seat Horizontal Motor Output: Circuit Open | GO to Pinpoint Test E |
| B14CF:11 | Seat Recline Motor Output: Circuit Short To Ground | GO to Pinpoint Test E |
| B14CF:12 | Seat Recline Motor Output: Circuit Short To Battery | GO to Pinpoint Test E |
| B14CF:13 | Seat Recline Motor Output: Circuit Open | GO to Pinpoint Test E |
| B14D0:11 | Seat Height Front/Tilt Motor Output: Circuit Short To Ground | GO to Pinpoint Test E |
| B14D0:12 | Seat Height Front/Tilt Motor Output: Circuit Short To Battery | GO to Pinpoint Test E |
| B14D0:13 | Seat Height Front/Tilt Motor Output: Circuit Open | GO to Pinpoint Test E |
| B14D2:11 | Seat Height Rear Motor Output: Circuit Short To Ground | GO to Pinpoint Test E |
| B14D2:12 | Seat Height Rear Motor Output: Circuit Short To Battery | GO to Pinpoint Test E |
| B14D2:13 | Seat Height Rear Motor Output: Circuit Open | GO to Pinpoint Test E |
| B1B87:11 | Seat Height Motor Speed/Position Sensor: Circuit Short To Ground | GO to Pinpoint Test F |
| B1B87:15 | Seat Height Motor Speed/Position Sensor: Circuit Short To Battery Or Open | GO to Pinpoint Test F |
| B1B89:11 | Seat Slide Motor Speed/Position Sensor: Circuit Short To Ground | GO to Pinpoint Test F |
| B1B89:15 | Seat Slide Motor Speed/Position Sensor: Circuit Short To Battery Or Open | GO to Pinpoint Test F |
| B1B91:11 | Seat Tilt Motor Speed/Position Sensor: Circuit Short To Ground | GO to Pinpoint Test F |
| B1B91:15 | Seat Tilt Motor Speed/Position Sensor: Circuit Short To Battery Or Open | GO to Pinpoint Test F |
| B1B93:11 | Seat Recline Motor Speed/Position Sensor: Circuit Short To Ground | GO to Pinpoint Test F |
| B1B93:15 | Seat Recline Motor Speed/Position Sensor: Circuit Short To Battery Or Open | GO to Pinpoint Test F |
| B1B96:24 | Seat Slide Forward Switch: Signal Stuck High | GO to Pinpoint Test E |
| B1B97:24 | Seat Slide Backward Switch: Signal Stuck High | GO to Pinpoint Test E |
| B1B98:24 | Seat Tilt Up Switch: Signal Stuck High | GO to Pinpoint Test E |
| B1B99:24 | Seat Tilt Down Switch: Signal Stuck High | GO to Pinpoint Test E |
| B1C00:24 | Seat Recline Up Switch: Signal Stuck High | GO to Pinpoint Test E |
| B1C01:24 | Seat Recline Down Switch: Signal Stuck High | GO to Pinpoint Test E |
| U0100:00 | Lost Communication With ECM/PCM 'A': No Sub Type Information | GO to Pinpoint Test V |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test W |
| U0199:00 | Lost Communication With 'Door Control Module A': No Sub Type Information | GO to Pinpoint Test M |
| U0212:00 | Lost Communication With Steering Column Control Module: No Sub Type Information | GO to Pinpoint Test N |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | GO to Pinpoint Test O |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | GO to Pinpoint Test P |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | GO to Pinpoint Test Q |
| U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | GO to Pinpoint Test R |
| U3000:09 | Control Module: Component Failure | GO to Pinpoint Test S |
| U3000:49 | Control Module: Internal Electronic Failure | GO to Pinpoint Test T |
| U3500:17 | Control Module Input Power 'A' Circuit Range/Performance: Circuit Voltage Above Threshold | GO to Pinpoint Test U |
| B1034:11 | Left Front Seat Heater Element: Circuit Short To Ground | GO to Pinpoint Test I |
| B1034:12 | Left Front Seat Heater Element: Circuit Short To Battery | GO to Pinpoint Test I |
| B1034:13 | Left Front Seat Heater Element: Circuit Open | GO to Pinpoint Test I |
| B1036:11 | Right Front Seat Heater Element: Circuit Short To Ground | GO to Pinpoint Test J |
| B1036:12 | Right Front Seat Heater Element: Circuit Short To Battery | GO to Pinpoint Test J |
| B1036:13 | Right Front Seat Heater Element: Circuit Open | GO to Pinpoint Test J |
| B1038:11 | Left Front Seat Heater Sensor: Circuit Short To Ground | GO to Pinpoint Test I |
| B1038:15 | Left Front Seat Heater Sensor: Circuit Short To Battery Or Open | GO to Pinpoint Test I |
| B103A:11 | Right Front Seat Heater Sensor: Circuit Short To Ground | GO to Pinpoint Test J |
| B103A:15 | Right Front Seat Heater Sensor: Circuit Short To Battery Or Open | GO to Pinpoint Test J |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.