2024 Ford E-Transit Van Cargo ExtendedFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart

WARNING: This page is about a different car, the 2024 Ford Maverick. However, it is still accessible from the selected car via links, so may be relevant.

The chart describes specific module configuration information:

Module Name Module Address Programmable Module Installation (PMI) Available Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
ABS module 760 Yes Yes IVD initialization None
ACCM 7C7 No No No None
ACM 727 Yes Yes No None
APIM 7D0 Yes Yes No None
AWD module 703 Yes Yes No None
BCM 726 Yes Yes No Battery type normal configuration
BCMC (BJB) 6F0 Yes Yes No None
BECM 7E4 Yes Yes No None
BECMB 723 Yes Yes No None
CCM 764 Yes Yes Radar horizontal and vertical alignment calibration None
DCDC 746 No No No None
DDM 740 Yes Yes Windows initialization None
DSP 783 Yes Yes No None
GSM 732 Yes Yes No None
GWM 716 Yes Yes No None
HVAC module 733 Yes Yes No None
IPC 720 Yes Yes No None
IPMA 706 Yes Yes Camera calibration None
OCS module 765 No No OCS module re-zero None
PACM 750 No No No None
PAM 736 Yes Yes No None
PCM 7E0 Yes Yes No None
PDM 741 Yes Yes Windows initialization None
PSCM 730 Yes Yes No None
RCM 737 Yes Yes No None
RTM 751 Yes Yes No None
SCCM 724 Yes Yes No None
SOBDMC 7E6 Yes Yes No None
SODL 7C4 Yes Yes No BLIS / CTA enable/disable
Blockage enable/disable
SODR 7C6 Yes Yes No BLIS / CTA enable/disable
Blockage enable/disable
TCU 754 Yes Yes No None
TRM / TBM 791 Yes Yes No None
WACM 725 Yes Yes No None
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.