Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2023 Ford F-150 LimitedFACTORY OEM SERVICE PROCEDURE
Electrified Drivetrain Control System DTCS
| DTC | Description | Action |
|---|---|---|
| P0480:00 | Fan 1 Control Circuit: No Sub Type Information | GO to Pinpoint Test C |
| P0600:00 | Serial Communication Link: No Sub Type Information | GO to Pinpoint Test QE |
| P0603:00 | Internal Control Module Keep Alive Memory (KAM) Error: No Sub Type Information | GO to Pinpoint Test QB |
| P0604:00 | Internal Control Module Random Access Memory (RAM) Error: No Sub Type Information | GO to Pinpoint Test QA |
| P0605:00 | Internal Control Module Read Only Memory (ROM) Error: No Sub Type Information | GO to Pinpoint Test QA |
| P0607:00 | Control Module Performance: No Sub Type Information | GO to Pinpoint Test QA |
| P060A:00 | Internal Control Module Monitoring Processor Performance: No Sub Type Information | GO to Pinpoint Test QE |
| P060B:00 | Internal Control Module A/D Processing Performance: No Sub Type Information | GO to Pinpoint Test QE |
| P060C:00 | Internal Control Module Main Processor Performance: No Sub Type Information | GO to Pinpoint Test QE |
| P060D:00 | Internal Control Module Accelerator Pedal Position Performance: No Sub Type Information | GO to Pinpoint Test DK |
| P061A:00 | Internal Control Module Torque Performance: No Sub Type Information | GO to Pinpoint Test QE |
| P0630:00 | VIN Not Programmed or Incompatible - ECM/PCM: No Sub Type Information | GO to Pinpoint Test QA |
| P064F:00 | Unauthorized Software/Calibration Detected: No Sub Type Information | GO to Pinpoint Test QA |
| P0685:00 | ECM/PCM Power Relay Control Circuit/Open: No Sub Type Information | GO to Pinpoint Test B |
| P068A:00 | ECM/PCM Power Relay De-Energized - Too Early: No Sub Type Information | GO to Pinpoint Test B |
| P06B8:00 | Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error: No Sub Type Information | GO to Pinpoint Test B |
| P087F:00 | One Pedal Drive System Performance: No Sub Type Information | GO to Pinpoint Test DK |
| P1001:00 | KOER Not Able to Complete, KOER Aborted: No Sub Type Information | GO to Pinpoint Test G |
| P1575:00 | Pedal Position Out Of Self Test Range: No Sub Type Information | GO to Pinpoint Test DK |
| P160A:00 | Control Module Vehicle Options Reconfiguration Error: No Sub Type Information | GO to Pinpoint Test QA |
| P162D:00 | Internal Control Module Cruise Control Performance: No Sub Type Information | GO to Pinpoint Test QE |
| P1674:00 | Control Module Software Corrupted: No Sub Type Information | GO to Pinpoint Test QE |
| P1934:00 | Vehicle Speed Signal: No Sub Type Information | GO to Pinpoint Test H |
| P193F:00 | Vehicle Speed Signal Intermittent: No Sub Type Information | GO to Pinpoint Test H |
| P2122:00 | Throttle/Pedal Position Sensor/Switch 'D' Circuit Low: No Sub Type Information | GO to Pinpoint Test DK |
| P2123:00 | Throttle/Pedal Position Sensor/Switch 'D' Circuit High: No Sub Type Information | GO to Pinpoint Test DK |
| P2127:00 | Throttle/Pedal Position Sensor/Switch 'E' Circuit Low: No Sub Type Information | GO to Pinpoint Test DK |
| P2128:00 | Throttle/Pedal Position Sensor/Switch 'E' Circuit High: No Sub Type Information | GO to Pinpoint Test DK |
| P2138:00 | Throttle/Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation: No Sub Type Information | GO to Pinpoint Test DK |
| P2227:00 | Barometric Pressure Sensor 'A' Circuit Range/Performance: No Sub Type Information | GO to Pinpoint Test UB |
| P2228:00 | Barometric Pressure Sensor 'A' Circuit Low: No Sub Type Information | GO to Pinpoint Test UB |
| P2229:00 | Barometric Pressure Sensor 'A' Circuit High: No Sub Type Information | GO to Pinpoint Test UB |
| U0104:00 | Lost Communication With Cruise Control Module: No Sub Type Information | GO to Pinpoint Test J |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module 'A': No Sub Type Information | GO to Pinpoint Test K |
| U0126:00 | Lost Communication With Steering Angle Sensor Module: No Sub Type Information | GO to Pinpoint Test L |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test M |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to Pinpoint Test N |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test O |
| U0164:00 | Lost Communication With HVAC Control Module 'A': No Sub Type Information | GO to Pinpoint Test P |
| U0212:00 | Lost Communication With Steering Column Control Module: No Sub Type Information | GO to Pinpoint Test L |
| U023A:00 | Lost Communication With Image Processing Module A: No Sub Type Information | GO to Pinpoint Test Q |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | GO to Pinpoint Test R |
| U0288:00 | Lost Communication With DC/AC Converter Control Module 'A': No Sub Type Information | GO to Pinpoint Test S |
| U0289:00 | Lost Communication With DC/AC Converter Control Module 'B': No Sub Type Information | GO to Pinpoint Test T |
| U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | GO to Pinpoint Test U |
| U0415:00 | Invalid Data Received from Anti-Lock Brake System (ABS) Control Module 'A': No Sub Type Information | GO to Pinpoint Test V |
| U0416:00 | Invalid Data Received From Vehicle Dynamics Control Module: No Sub Type Information | GO to Pinpoint Test V |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | GO to Pinpoint Test V |
| U1010:00 | Invalid Internal Control Module Monitoring Data Received from Hybrid Powertrain Control Module: No Sub Type Information | GO to Pinpoint Test V |
| U1012:00 | Invalid Internal Control Module Monitoring Data Received from Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | GO to Pinpoint Test V |
| U1014:00 | Invalid Internal Control Module Monitoring Data Received from Restraints Control Module: No Sub Type Information | GO to Pinpoint Test V |
| U1022:00 | Invalid Internal Control Module Monitoring Data Received from Body Control Module: No Sub Type Information | GO to Pinpoint Test V |
| U103B:00 | Invalid Internal Control Module Monitoring Data Received from Differential Control Module - Rear: No Sub Type Information | GO to Pinpoint Test V |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | GO to Pinpoint Test U |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | GO to Pinpoint Test U |
| U2102:00 | Adjust Down Button: No Sub Type Information | GO to Pinpoint Test U |
| U3003:00 | Battery Voltage: No Sub Type Information | GO to Pinpoint Test W |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
