WARNING: This page is about a different car, the 2023 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

The chart describes specific module configuration information:

Module Name	Module Address	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
ABS module	760	Yes	Yes	ABS Pressure Bleeding and Bleed Check ABS calibration IVD initialization EPB initialization PCM PATS key programming	None
ACM (except China)	727	Yes	Yes	No	None
APIM	7D0	Yes	Yes (diagnostic scan tool and USB flash drive)	No	None
ATCM	792	No	No	No	None
BCM	726	Yes	Yes	Key programming PATS reset TPMS sensor location calibration LIN new module initialization Battery monitor sensor reset BCM self-test	None
BCMC [ BJB]	6F0	Yes	Yes	No	None
CCM (Private CAN)	764	Yes	Yes	CCM radar alignment	None
CMR	7C1	Yes	Yes	No	None
DCMR (electronic limited slip differential)	795	No	No	No	None
DDM	740	Yes	Yes	Windows initialization	None
DSM	744	Yes	Yes	Seat soft stop calibration Memory pedal calibration (if equipped) Memory steering column calibration (if equipped)	None
DSP	783	Yes	Yes	No	None
FCIM	7A7	Yes	Yes	No	None
GSM	732	No	No	Stay in Neutral calibration	None
GWM	716	Yes	Yes (diagnostic scan tool and USB flash drive)	No	None
HCM	734	Yes	Yes	HCM calibration	None
HUD module	7B2	Yes	Yes	HUD module calibration	None
IPC	720	Yes	Yes (diagnostic scan tool and USB flash drive)	No	None
IPMA	706	Yes	Yes (diagnostic scan tool and USB flash drive)	360 degree view camera alignment (if equipped) pro trailer backup assist camera alignment (if equipped)	None
LDCMA (Private CAN)	6F6	Yes	Yes	Headlamp adjustment	None
LDCMB (Private CAN)	6F7	Yes	Yes	Headlamp adjustment	None
OCS module (except China)	765	No	No	OCSM re-zero	None
PCM	7E0	Yes	Yes	PATS parameter reset Misfire Monitor Neutral Profile Correction	None
PDM	741	Yes	Yes	Windows initialization	None
PSCM	730	Yes	Yes	No	None
RACM	774	Yes	Yes	No	None
RBM	766	Yes	Yes	No	None
RCM	737	Yes	Yes	ABS calibration service functions	None
RFA module	731	Yes	Yes	Phone pairing PATS module initialization	None
RGTM	775	Yes	Yes	No	None
RTM	751	Yes	Yes	No	None
SCCM	724	Yes	Yes	No	None
SCMB	7A3	Yes	Yes	Seat soft stop calibration	None
Seat Control Module C (SCMC)	702	Yes	Yes	No	None
Seat Control Module D (SCMD)	763	Yes	Yes	No	None
SCME (integrated with DSM)	776	Yes	Yes	No	None
SCMF	777	Yes	Yes	No	None
SCMG	712	Yes	Yes	No	None
SCMH	713	Yes	Yes	No	None
SCMJ	787	Yes	Yes	Third row seat learning	None
SODCMC (Private CAN)	6F2	Yes	Yes	No	None
SODCMD (Private CAN)	6F3	Yes	Yes	No	None
SODL (Private CAN)	7C4	Yes	Yes	No	None
SODR (Private CAN)	7C6	Yes	Yes	No	None
TCCM	761	Yes	Yes	No	None
TCU	754	Yes	Yes (diagnostic scan tool and USB flash drive)	No	None
TRM	791	Yes	Yes	No	TBM configuration present/not present
VDM	721	Yes	Yes	Ride height calibration	None
WACM	725	Yes	Yes	No	None

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Module Configuration and Parameter Chart

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?