Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module Configuration and Parameter Chart
The chart describes specific module configuration information:
| Module Name | Module Address | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Programmable Parameters |
|---|---|---|---|---|---|
| ABS module | 760 | Yes | Yes | IVD initialization | None |
| ACM | 727 | Yes | Yes | No | None |
| APIM | 7D0 | Yes | Yes | No | Rear camera |
| ATCM | 792 | No | No | No | None |
| BCM | 726 | Yes | Yes | No | Front/rear tire placard (pressure) Lock feedback horn Mislock horn Perimeter alarm - vehicle doors present Rear camera Remote start - vehicle doors present Remote start enable/disable Trailer outage Trailer module present |
| BECMB | 723 | Yes | No | No | None |
| CCM | 764 | Yes | Yes | No | None |
| DCDC (voltage quality module [VQM]) | 746 | Yes | No | No | None |
| DSP | 783 | Yes | No | No | None |
| FCIM | 7A7 | Yes | Yes | No | Remote start features |
| GWM | 716 | Yes | Yes | No | None |
| HUD | 7B2 | No | No | No | None |
| IPC | 720 | Yes | Yes | No | Day/year Digital speedometer Driver Beltminder Hood ajar warning Intelligent access menu Maintenance settings Mid-passenger Beltminder MyKey speed limiter MyKey volume limit Passenger Beltminder Remote start climate settings Driver seat Passenger seat Rear defrost Remote start feature Trailer control (off road package) Trailer lighting Trailer sway |
| IPMA | 706 | Yes | Yes | Camera calibration | None |
| OCSM | 765 | No | No | OCSM re-zero | None |
| PAM (integrated with BCM) | 736 | Yes | Yes | No | None |
| PCM | 7E0 | Yes | Yes | No | None |
| PSCM | 730 | Yes | Yes | No | None |
| RCM | 737 | Yes | Yes | No | None |
| RTM | 751 | Yes | Yes | No | None |
| SCCM | 724 | Yes | Yes | No | None |
| SODL | 7C4 | Yes | Yes | No | BLIS/ CTA enable/disable |
| SODR | 7C6 | Yes | Yes | No | BLIS/ CTA enable/disable |
| TCU | 754 | Yes | No | No | None |
| TRM | 791 | Yes | Yes | No | None |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.