WARNING: This page is about a different car, the 2022 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

The chart describes specific module configuration information:

Module Name	Module Address	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
ABS module	760	Yes	Yes	IVD initialization	None
ACM	727	Yes	Yes	No	None
APIM	7D0	Yes	Yes	No	Rear camera
ATCM	792	No	No	No	None
BCM	726	Yes	Yes	No	Front/rear tire placard (pressure) Lock feedback horn Mislock horn Perimeter alarm - vehicle doors present Rear camera Remote start - vehicle doors present Remote start enable/disable Trailer outage Trailer module present
BECMB	723	Yes	No	No	None
CCM	764	Yes	Yes	No	None
DCDC (voltage quality module [VQM])	746	Yes	No	No	None
DSP	783	Yes	No	No	None
FCIM	7A7	Yes	Yes	No	Remote start features
GWM	716	Yes	Yes	No	None
HUD	7B2	No	No	No	None
IPC	720	Yes	Yes	No	Day/year Digital speedometer Driver Beltminder Hood ajar warning Intelligent access menu Maintenance settings Mid-passenger Beltminder MyKey speed limiter MyKey volume limit Passenger Beltminder Remote start climate settings Driver seat Passenger seat Rear defrost Remote start feature Trailer control (off road package) Trailer lighting Trailer sway
IPMA	706	Yes	Yes	Camera calibration	None
OCSM	765	No	No	OCSM re-zero	None
PAM (integrated with BCM)	736	Yes	Yes	No	None
PCM	7E0	Yes	Yes	No	None
PSCM	730	Yes	Yes	No	None
RCM	737	Yes	Yes	No	None
RTM	751	Yes	Yes	No	None
SCCM	724	Yes	Yes	No	None
SODL	7C4	Yes	Yes	No	BLIS/ CTA enable/disable
SODR	7C6	Yes	Yes	No	BLIS/ CTA enable/disable
TCU	754	Yes	No	No	None
TRM	791	Yes	Yes	No	None

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Module Configuration and Parameter Chart

Use the Manual With the Right Hardware

When to See a Mechanic