Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Ford E-Transit Van Cargo ExtendedFACTORY OEM SERVICE PROCEDURE
Powertrain Control Module (PCM)
| DTC | Description | Action |
|---|---|---|
| P0600:00 | Serial Communication Link: No Sub Type Information | GO to Pinpoint Test A |
| P0603:00 | Internal Control Module Keep Alive Memory (KAM) Error: No Sub Type Information | GO to Pinpoint Test C |
| P0604:00 | Internal Control Module Random Access Memory (RAM) Error: No Sub Type Information | GO to Pinpoint Test B |
| P0605:00 | Internal Control Module Read Only Memory (ROM) Error: No Sub Type Information | GO to Pinpoint Test B |
| P0607:00 | Control Module Performance: No Sub Type Information | GO to Pinpoint Test B |
| P060A:00 | Internal Control Module Monitoring Processor Performance: No Sub Type Information | GO to Pinpoint Test A |
| P060B:00 | Internal Control Module A/D Processing Performance: No Sub Type Information | GO to Pinpoint Test A |
| P060C:00 | Internal Control Module Main Processor Performance: No Sub Type Information | GO to Pinpoint Test A |
| P061A:00 | Internal Control Module Torque Performance: No Sub Type Information | GO to Pinpoint Test A |
| P0630:00 | VIN Not Programmed or Incompatible - ECM/PCM: No Sub Type Information | GO to Pinpoint Test B |
| P064F:00 | Unauthorized Software/Calibration Detected: No Sub Type Information | GO to Pinpoint Test B |
| P0685:00 | ECM/PCM Power Relay Control Circuit/Open: No Sub Type Information | GO to Pinpoint Test D |
| P068A:00 | ECM/PCM Power Relay De-Energized - Too Early: No Sub Type Information | GO to Pinpoint Test D |
| P06B8:00 | Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error: No Sub Type Information | GO to Pinpoint Test D |
| P1001:00 | KOER Not Able to Complete, KOER Aborted: No Sub Type Information | GO to Pinpoint Test E |
| P160A:00 | Control Module Vehicle Options Reconfiguration Error: No Sub Type Information | GO to Pinpoint Test B |
| P162D:00 | Internal Control Module Cruise Control Performance: No Sub Type Information | GO to Pinpoint Test A |
| P1674:00 | Control Module Software Corrupted: No Sub Type Information | GO to Pinpoint Test A |
| P1934:00 | Vehicle Speed Signal: No Sub Type Information | GO to Pinpoint Test F |
| P193F:00 | Vehicle Speed Signal Intermittent: No Sub Type Information | GO to Pinpoint Test F |
| U0104:00 | Lost Communication With Cruise Control Module: No Sub Type Information | GO to Pinpoint Test G |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information | GO to Pinpoint Test H |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test J |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to Pinpoint Test K |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test L |
| U0164:00 | Lost Communication With HVAC Control Module: No Sub Type Information | GO to Pinpoint Test M |
| U0212:00 | Lost Communication With Steering Column Control Module: No Sub Type Information | GO to Pinpoint Test I |
| U023A:00 | Lost Communication With Image Processing Module A: No Sub Type Information | GO to Pinpoint Test N |
| U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | GO to Pinpoint Test O |
| U0416:00 | Invalid Data Received From Vehicle Dynamics Control Module: No Sub Type Information | GO to Pinpoint Test P |
| U0437:00 | Invalid Data Received From Differential Control Module - Rear: No Sub Type Information | GO to Pinpoint Test P |
| U0594:00 | Invalid Data Received From Hybrid/EV Powertrain Control Module "A": No Sub Type Information | GO to Pinpoint Test P |
| U1014:00 | Invalid Internal Control Module Monitoring Data Received from Restraints Control Module: No Sub Type Information | GO to Pinpoint Test P |
| U103B:00 | Invalid Internal Control Module Monitoring Data Received from Differential Control Module - Rear: No Sub Type Information | GO to Pinpoint Test P |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | GO to Pinpoint Test Q |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | GO to Pinpoint Test R |
| U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | GO to Pinpoint Test S |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
