2021 Ford F-150 RaptorFACTORY OEM SERVICE PROCEDURE

Failure Mode Effects Management (FMEM)

The FMEM system is an alternative strategy in the PCM designed to maintain vehicle operation if there is a concern with one or more critical sensor inputs. When a sensor input is perceived to be out of limits by the PCM, an alternative strategy is initiated. The PCM substitutes a fixed value and continues to monitor the incorrect sensor input. If the suspect sensor operates within limits, the PCM returns to the normal engine running strategy. FMEM operation results in continuous memory DTCs during normal engine operation and when carrying out the key on engine running (KOER) self-test mode.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.