2021 Ford F-150 RaptorFACTORY OEM SERVICE PROCEDURE

Fuel Pressure Relief Valve

The fuel pressure relief valve is a mechanical spring activated valve. If the pressure exceeds the maximum expected pressure for the system the fuel pressure relief valve activates to relieve fuel pressure back to the fuel tank. The fuel pressure relief valve is not expected to activate during normal vehicle operation. The fuel pressure relief valve has a limited number of activations before the part is no longer reliable and may not fully close. The fuel pressure control valve is mounted at the opposite end of the fuel rail as the fuel rail pressure (FRP) sensor.

G13343519Courtesy of FORD MOTOR CO.

Typical Fuel Pressure Relief Valve 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.