2021 Ford F-150 RaptorFACTORY OEM SERVICE PROCEDURE

Fuel Pressure Control Valve

The PCM controls the fuel rail pressure by activating the fuel pressure control valve which regulates the fuel pressure in the fuel rails. For additional information, refer to FUEL SYSTEM , Fuel Pump System. The PCM regulates fuel rail pressure by controlling the duty cycle of the fuel pressure control valve solenoid. An increase or decrease in the duty cycle maintains pressure in the fuel system or vents pressure to the fuel cooler. A high duty cycle indicates a high fuel rail pressure is being commanded. A low duty cycle indicates less pressure is being commanded. The fuel pressure control valve is mounted on the fuel rail.

G07432273Courtesy of FORD MOTOR CO.

Typical Fuel Pressure Control Valve 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.