2021 Ford Explorer TimberlineFACTORY OEM SERVICE PROCEDURE

EXPLORER AWD Except HEV

EXPLORER AWD Except HEV

Measurement Minimum Preferred Maximum
Left Front Caster (°) 2.79 3.54 4.29
Right Front Caster (°) 2.79 3.54 4.29
Left Front Camber (°) -1.23 -0.48 0.27
Right Front Camber (°) -1.23 -0.48 0.27
Front Toe (°) 0 0.2 0.4
Left SAI (°) 0 0 0
Right SAI (°) 0 0 0
Left Rear Camber (°) -1.65 -0.9 -0.15
Right Rear Camber (°) -1.65 -0.9 -0.15
Rear Toe (°) 0.04 0.24 0.44
Thrust Angle (°) 0 0 0
Left Toe Out, Inward (°) 0 0 0
Right Toe Out, Inward (°) 0 0 0
Left Toe Out, Outward (°) 0 0 0
Right Toe Out, Outward (°) 0 0 0
Left Max Turn, Inward (°) 0 0 0
Right Max Turn, Inward (°) 0 0 0
Left Max Turn, Outward (°) 0 0 0
Right Max Turn, Outward (°) 0 0 0
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.