2021 Ford Explorer STFACTORY OEM SERVICE PROCEDURE

General Specifications

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Item Specification
Steering Gear F250/350 
Meshload 0.31-0.9 Nm (2.65-7.96 lb-in)
Meshload + preload (maximum) 2.32 Nm (20.5 lb-in)
Steering gear preload 0.34-1.36 Nm (3-12 lb-in)
Turns lock-to-lock 4.0
Power Steering Pump 
Flow 10.6-12.0 L/min (2.8-3.2 gpm) Fluid @ 74-80 °C (165-175 °F) Engine at idle
Minimum Capacity 5.7 L/min (1.5 gpm) Fluid @ 80 ° C (175 °F) Engine at idle Pressure 5, 000 kPa (725 psi)
Power steering purge vacuum 68-85 kPa (20-25 in/Hg)
Pressure 1, 034 kPa (150 psi) Fluid @ 74-80 °C (165-175 °F) Engine at idle
Relief pressure 12, 100-12, 900 kPa (1, 755-1, 871 psi)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.