2021 Ford Escape Titanium Plug-In HybridFACTORY OEM SERVICE PROCEDURE

Pinpoint Test X: Control Module Improper Wake-Up Performance

  1. Normal Operation and Fault Conditions 

    The ABS module continually monitors the brake system for potential system concerns. During module wake up, several items are monitored and certain operations are expected to be performed. If one or more of these do not occur as expected, the ABS module sets a DTC and requests the illumination of the ABS warning indicator.

    REFER to: Anti-Lock Brake System (ABS) and Stability Control - System Operation and Component Description  .

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    ABS U3012:68 Control Module Improper Wake-up Performance: Event Information This DTC sets due to a temporary condition in the EBB unit and usually sets as a result of another DTC setting. RETRIEVE and DIAGNOSE all other ABS module Diagnostic Trouble Codes (DTCs).

    Possible Sources 

    • Other Diagnostic Trouble Codes (DTCs) present in the ABS module
    • EBB unit

  2. Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.