Quick Lookups: Fluids

2021 Ford Escape SEL Hybrid, FWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 2.5L Eng 4.70 OZS. 0.13 L POE Oil YN-34 Approximate capacity. S
Air Cond Refrigerant 2.5L Eng 1.15 LBS. 0.52 KG R-1234yf Approximate capacity. S
Automatic Transmission Fluid Trans Mfr CD HF45 Dry Transmission 4.76 QTS. 4.5 L MOTORCRAFT Automatic Transmission Fluid MERCON ULV Approximate capacity. S
Brake Fluid N/A N/A MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. Fill between "max" and "min" lines on reservoir. S
Engine Coolant 2.5L Eng High Temperature Circuit 9.60 QTS. 9.08 L MOTORCRAFT Yellow Antifreeze/Coolant Prediluted S
Engine Coolant 2.5L Eng Low Temperature Circuit 5.00 QTS. 4.73 L MOTORCRAFT Yellow Antifreeze/Coolant Prediluted S
Engine Oil 2.5L Eng w/Filter 5.70 QTS. 5.39 L MOTORCRAFT SAE 0W-20 Full Synthetic Motor Oil Approximate capacity. S
Fuel Tank SE Hybrid,SEL Hybrid,Titanium Hybrid,2.5L Eng 14.20 GALS. 53.75 L S
Transfer Case Fluid w/Cooler 0.45 QTS. 0.42 L MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant Approximate capacity. S
Transfer Case Fluid w/o Cooler 0.40 QTS. 0.37 L MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant Approximate capacity. S
Windshield Washer Fluid N/A N/A MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.