2021 Ford Edge ST-Line, FWDFACTORY OEM SERVICE PROCEDURE

Steering Wheel Cover Repair

Materials 

Name Specification
Motorcraft® Instant Gel AdhesiveTA-19-C WSS-M2G401-B5

Repair 

  1. NOTE: If re-adhering leather to the front side of the steering wheel only, it will not be necessary to remove the steering wheel. Steering wheel removal is necessary only when repairing loose leather on the backside of the steering wheel.

    If necessary, remove the steering wheel. Refer to: Steering Wheel 

  2. Position the loose leather out of the way.
  3. Apply the specified adhesive evenly over the wheel spoke.

    Material

    : Motorcraft® Instant Gel Adhesive / TA-19-C (WSS-M2G401-B5)

  4. Position the loose leather back into the original position.
  5. NOTE: The adhesive should be completely set after 5 minutes. Do not pull on the repair area.

    Smooth the leather and tuck in for neat appearance.

  6. Apply pressure (for at least 30 seconds) until the leather is bonded to the wheel spoke.
  7. If removed, install the steering wheel. Refer to: Steering Wheel 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.