2021 Ford Bronco Sport BaseFACTORY OEM SERVICE PROCEDURE

Interior Lighting System DTCS

DTC Description Action
B1175:01 Driver Door Ajar Switch: General Electrical Failure GO to Pinpoint Test A
B1175:01 Driver Door Ajar Switch: General Electrical Failure GO to Pinpoint Test C
B1176:01 Passenger Door Ajar Switch: General Electrical Failure GO to Pinpoint Test A
B1176:01 Passenger Door Ajar Switch: General Electrical Failure GO to Pinpoint Test C
B11C0:01 Driver Side Rear Door Ajar Switch: General Electrical Failure GO to Pinpoint Test A
B11C0:01 Driver Side Rear Door Ajar Switch: General Electrical Failure GO to Pinpoint Test C
B11C1:01 Passenger Side Rear Door Ajar Switch: General Electrical Failure GO to Pinpoint Test A
B11C1:01 Passenger Side Rear Door Ajar Switch: General Electrical Failure GO to Pinpoint Test C
B1306:01 Liftgate Ajar Switch: General Electrical Failure GO to Pinpoint Test C
B1306:01 Liftgate Ajar Switch: General Electrical Failure GO to Pinpoint Test I
B1313:11 Interior Lighting Output: Circuit Short To Ground GO to Pinpoint Test B
B1313:15 Interior Lighting Output: Circuit Short To Battery or Open GO to Pinpoint Test B
B1313:15 Interior Lighting Output: Circuit Short To Battery or Open GO to Pinpoint Test D
B145C:11 Ambient Lighting Power Supply Output: Circuit Short To Ground GO to Pinpoint Test G
B145C:15 Ambient Lighting Power Supply Output: Circuit Short To Battery or Open GO to Pinpoint Test G
B1465:00 Ambient Lighting Bus 1: No Sub Type Information GO to Pinpoint Test G
B1465:00 Ambient Lighting Bus 1: No Sub Type Information GO to Pinpoint Test H
B1465:96 Ambient Lighting Bus 1: Component Internal Failure GO to Pinpoint Test G
B1465:96 Ambient Lighting Bus 1: Component Internal Failure GO to Pinpoint Test H
B1467:00 Ambient Lighting Bus 3: No Sub Type Information GO to Pinpoint Test G
B1467:00 Ambient Lighting Bus 3: No Sub Type Information GO to Pinpoint Test H
B1467:96 Ambient Lighting Bus 3: Component Internal Failure GO to Pinpoint Test G
B1467:96 Ambient Lighting Bus 3: Component Internal Failure GO to Pinpoint Test H
B14AA:11 Demand Lamp Output: Circuit Short To Ground GO to Pinpoint Test E
B14AA:15 Demand Lamp Output: Circuit Short To Battery or Open GO to Pinpoint Test E
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.