2020 Ford GTFACTORY OEM SERVICE PROCEDURE

Engine Mechanical: Mechanical: Engine: Assembly: Engine

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Special Tool(s) / General Equipment 

GFD344926Courtesy of FORD MOTOR COMPANY
100-002 (TOOL-4201-C) Holding Fixture with Dial Indicator Gauge
GFD344715Courtesy of FORD MOTOR COMPANY
205-142 (T80T-4000-J) Installer, Differential Bearing Cone
GFD344562Courtesy of FORD MOTOR COMPANY
205-149 (T80T-4000-R) Installer, Spindle Bearing
GFD344564Courtesy of FORD MOTOR COMPANY
205-153 (T80T-4000-W) Handle
GFD344504Courtesy of FORD MOTOR COMPANY
303-102 Installer, Crankshaft Pulley
GFD344716Courtesy of FORD MOTOR COMPANY
303-1247 VCT Spark Plug Tube Seal Remover and Installer TKIT-2006UF-FLM TKIT-2006UF-ROW
GFD344505Courtesy of FORD MOTOR COMPANY
303-1251 Installer, Front Seal TKIT-2006UF-FLM TKIT-2006UF-ROW
GFD344471Courtesy of FORD MOTOR COMPANY
303-1633 Remover, Roller Rocker Follower TKIT-2014D-ROW3 TKIT-2014D-FL_ROW
GFD344472Courtesy of FORD MOTOR COMPANY
303-1633-01 Remover, Roller Rocker Follower
GFD344473Courtesy of FORD MOTOR COMPANY
303-1655 Tool, Camshaft Holding
GFD344506Courtesy of FORD MOTOR COMPANY
303-335 (T88T-6701-A) Installer, Front Cover Oil Seal TKIT-1988-FLM TKIT-1988-F
GFD344565Courtesy of FORD MOTOR COMPANY
307-399 Alignment Pins, Transmission Fluid Pump TKIT-2002N-DEW TKIT-2000AP-FLM/LM
Strap Wrench
Piston Ring Compressor

Materials 

Name Specification
Motorcraft® Threadlock 262 TA-26 WSK-M2G351-A6
Motorcraft® High Performance Engine RTV Silicone TA-357 WSE-M4G323-A6
Castrol® EDGE® Supercar 5W-50 WSS-M2C931-C
Motorcraft® Orange Concentrated Antifreeze/Coolant VC-3-B WSS-M97B44-D
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.