Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module Configuration and Parameter Chart
The chart describes specific module configuration information.
| Module Name | Module Address | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Progammable Parameters |
|---|---|---|---|---|---|
| ABS module | 760 | Yes | Yes | IVD initialization | None |
| APIM | 7D0 | Yes | Yes | No | None |
| ACM | 727 | Yes | Yes | No | None |
| BCM | 726 | Yes | Yes | PATS lock configuration TPMS sensor configuration (training) Electronic steering column lock configuration |
Courtesy wipe enable/disable Keypad enable/disable Remote keyless entry frequency configuration Remote keyless entry, two-way Remote start enable/disable Remote start duration Person 1 - 4 Vehicle Limit Remote start-lighting enable Remote start-ignition enable RTM configuration TRM configuration Trailer connect configuration Trailer outage configuration |
| BECMB | 723 | Yes | Yes | No | None |
| Audio DSP | 783 | Yes | Yes | No | None |
| GWM | 716 | Yes | Yes | No | None |
| HVAC module | 733 | Yes | Yes | No | Remote start |
| IPC | 720 | Yes | Yes | No | Remote start feature enable/disable Remote start Climate settings Driver seat Passenger seat Rear defrost Steering wheel |
| OCSM | 765 | No | No | OCS module re-zero | None |
| PAM | 736 | Yes | Yes | No | None |
| PSCM | 730 0 |
Yes | Yes | No | Rack end stop enable |
| PCM | 7E0 | Yes | Yes | No | None |
| RCM | 737 | Yes | Yes | ABS module initialization (new RCM installation only) | Event data recorder lock status |
| SODL | 7C4 | Yes | Yes | No | None |
| SODR | 7C6 | Yes | Yes | No | None |
| SCCM | 726 | Yes | Yes | No | None |
| TCU | 754 | Yes | Yes | No | None |
| TRM | 791 | Yes | Yes | No | None |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.