2018 Ford Taurus SEL, FWD, GasFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart

The chart describes specific module configuration information:

Module Module Address Requires PMI Reprogram/ Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
ABS module 760 Yes Yes ABS lock to lock test None
Accessory Protocol Interface Module (APIM) 7D0 Yes Yes APIM speaker
APIM ID
APIM precondition
APIM provisioning		 None
Audio Front Control Module (ACM) 727 Yes Yes No None
BECMB (Extended Power Module) 723 Yes No No None
Body Control Module (BCM) 726 Yes Yes No Automatic Engine Idle Shutdown (AEIS) enable (push-button start only)
Daytime running lamps type
Locking horn feedback (non Police package)
Locking light feedback
Police dark car rear door idle silent mode
Trunk release present (RKE)
Tire placard pressure
Tire size
Audio Digital Signal Processing (DSP) module 783 Yes Yes No None
Cruise-Control Module (C-CM) 764 Yes Yes No None
Driver Door Module (DDM) 740 Yes Yes No None
Driver Seat Module (DSM) 744 Yes Yes No Easy entry/easy exit present
Dual Climate Controlled Seat Module (DCSM) 776 Yes Yes No None
Front Controls Interface Module (FCIM) 7A7 No No No None
Front Control/Display Interface Module (FCDIM) 7A5 Yes Yes No Police dark car illumination
Generic Function Module (GFM) (Police package) 7A1 No No No None
Global Positioning System Module (GPSM) (without touchscreen) 701 Yes Yes No None
Head Up Display (HUD) module 7B2 No No No None
Heated Steering Wheel Module (HSWM) 714 Yes Yes No None
HVAC module 733 Yes Yes No None
Image Processing Module - A (IPM-A) 706 Yes Yes Camera alignment None
Instrument Panel Cluster (IPC) 720 Yes Yes Compass zone test AEIS disable (one key cycle) (push-button start only)
Occupant Classification System Module (OCSM) 765 No No Seat weight sensor re-zero None
Parking Aid Module (PAM) 736 Yes Yes No None
PCM 7E0 Yes Yes Adaptive airflow
Idle speed
Refueling event
Fuel trim		 None
Power Steering Control Module (PSCM) 730 Yes Yes No None
Restraints Control Module (RCM) 737 Yes Yes Seat weight sensor re-zero Emergency call present
Driver Belt-Minder®
Passenger Belt-Minder®
Remote Function Actuator (RFA) module 731 Yes Yes No Auto locking
Auto unlocking
Passive entry/passive start enable configuration
Unlock sequence
Driver Active Motion Seat Module (SCMG) 712 Yes No No None
Passenger Active Motion Seat Module (SCMH) 713 Yes No No None
Side Obstacle Detection Control Module - Left (SOD-L) 7C6 Yes Yes No BLIS® enable/disable
CTA enable/disable configuration
Side Obstacle Detection Control Module - Right (SOD-R) 7C6 Yes Yes No BLIS® enable/disable
CTA enable/disable configuration
Steering Column Control Module (SCCM) 724 Yes Yes No None
Radio Transceiver Module (RTM) 751 No No No None
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.