Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Ford Taurus Limited, AWD, GasFACTORY OEM SERVICE PROCEDURE
Cruise Control System DTCS: Adaptive: BCM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| U0405:68 | Invalid Data Received From Cruise Control Module: No Sub Type Information | This DTC sets when the Body Control Module (BCM) receives invalid network data from the Cruise-Control Module (C-CM). RETRIEVE and REPAIR all non-network DTCs in the C-CM and other modules on the network. |
| U0433:00 | Invalid Data Received From Cruise Control Front Distance Range Sensor: No Sub Type Information | This DTC sets when the BCM receives invalid network data from the C-CM radar sensor that is integral to the C-CM. RETRIEVE and REPAIR all non-network DTCs in the C-CM and other modules on the network. |
| U2107:53 | Collision Mitigation By Braking: Deactivated | The BCM uses an internal fault detection incremental counter to record the amount of faults from the C-CM. Once the incremental counter has reached 128 faults, DTC U2107:53 sets in the BCM. RETRIEVE and REPAIR all non-network DTCs in the C-CM and other modules on the network. |
| U2108:53 | Adaptive Cruise Control: Deactivated | The BCM uses an internal fault detection incremental counter to record the amount of faults from the C-CM. Once the incremental counter has reached 128 faults, DTC U2108:53 sets in the BCM. RETRIEVE and REPAIR all non-network DTCs in the C-CM and other modules on the network. |
| All other DTCs | -- | REFER to Multifunction Electronic Modules . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
