2018 Ford Taurus Limited, AWD, GasFACTORY OEM SERVICE PROCEDURE

Windshield Glass: Removal

  1. Remove the upper cowl panel grille. Refer to Front End Body Panels .
  2. Remove the overhead console. Refer to Instrument Panel and Console .
  3. If equipped with rain sensitive wipers, remove the rain sensor. Refer to Wipers and Washers .
  4. If not equipped with rain sensitive wipers, remove the interior rear view mirror. Refer to Rear View Mirrors
  5. Disconnect the rain sensor/windshield camera defroster harness.
    GFD343426Courtesy of FORD MOTOR COMPANY
  6. Remove the LH and RH A-pillar trim panels. Refer to Interior Trim and Ornamentation .
  7. Remove the passenger front assist handle.
  8. Remove the LH and RH sun visors.
  9. Lower the front portion of the headliner and block with a suitable material.
  10. WARNING: Wear eye and ear protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.