2018 Ford Fusion Energi PlatinumFACTORY OEM SERVICE PROCEDURE

Rear View Mirrors DTCS: DDM

DTC INDEX

DTC Description Action
B1163:11 Left Mirror Heater Output: Circuit Short To Ground GO to Pinpoint Test D
B1163:15 Left Mirror Heater Output: Circuit Short To Battery Or Open GO to Pinpoint Test D
B11F6:11 Driver Folding Mirror Motor: Circuit Short To Ground GO to Pinpoint Test E
B11F6:15 Driver Folding Mirror Motor: Circuit Short To Battery or Open GO to Pinpoint Test E
B1C06:11 Driver Up/Down And Common Mirror Motor: Circuit Short To Ground If a single mirror is inoperative, GO to Pinpoint Test A
If a single exterior mirror does not function correctly in all directions, GO to Pinpoint Test B
B1C06:15 Driver Up/Down And Common Mirror Motor: Circuit Short To Battery or Open If a single mirror is inoperative, GO to Pinpoint Test A
If a single exterior mirror does not function correctly in all directions, GO to Pinpoint Test B
B1C09:11 Driver Left/Right Mirror Motor: Circuit Short To Ground GO to Pinpoint Test B
B1C09:15 Driver Left/Right Mirror Motor: Circuit Short To Battery Or Open GO to Pinpoint Test B
B1C10:11 Driver Up/Down Mirror Motor: Circuit Short To Ground GO to Pinpoint Test B
B1C10:15 Driver Up/Down Mirror Motor: Circuit Short To Battery Or Open GO to Pinpoint Test B
B1C13:11 Driver Up/Down Mirror Motor Feedback: Circuit Short To Ground GO to Pinpoint Test C
B1C13:15 Driver Up/Down Mirror Motor Feedback: Circuit Short To Battery Or Open GO to Pinpoint Test C
B1C14:11 Driver Left/Right Mirror Motor Feedback: Circuit Short To Ground GO to Pinpoint Test C
B1C14:15 Driver Left/Right Mirror Motor Feedback: Circuit Short To Battery Or Open GO to Pinpoint Test C
C1B15:11 Sensor Supply Voltage B: Circuit Short To Ground GO to Pinpoint Test C
C1B15:15 Sensor Supply Voltage B: Circuit Short To Battery or Open GO to Pinpoint Test C
All other DDM Diagnostic Trouble Codes (DTCs) - REFER to: Locks, Latches and Entry Systems .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.