Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Ford Focus S, Automatic DCT TransFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas,2.0L Eng | 4.10 OZS. | 0.12 L | PAG YN-35 | S | ||
| Air Cond Refrigerant | 2.0L Eng,Normally Aspirated | 1.37 LBS. | 0.62 KG | R-1234yf | S | ||
| Automatic Transmission Fluid | 2.0L Eng,Trans Mfr CD DPS6 | Drain and Refill | 1.70 QTS. | 1.6 L | MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC | S | |
| Automatic Transmission Fluid | 2.0L Eng,Trans Mfr CD DPS6 | Dry Fill | 1.80 QTS. | 1.7 L | MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC | S | |
| Brake Fluid | N/A | N/A | MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. | S | |||
| Engine Coolant | 2.0L Eng | 6.82 QTS. | 6.45 L | MOTORCRAFT Orange Antifreeze/Coolant Prediluted | S | ||
| Engine Oil | 2.0L Eng,Normally Aspirated | 4.54 QTS. | 4.29 L | MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: Full Synthetic Motor Oil | FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. | S | |
| Fuel Tank | 2.0L Eng | 12.40 GALS. | 46.93 L | S | |||
| Windshield Washer Fluid | N/A | N/A | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.