2018 Ford Flex SEFACTORY OEM SERVICE PROCEDURE

External Controls: SelectShift

SelectShift™ 

SelectShift™ Switch 

When the selector lever is moved to the S position, the driver can shift the transmission manually using the SelectShift™ switch mounted on the selector lever knob.

GFD321669Courtesy of FORD MOTOR COMPANY

Paddle Shifter 

When the selector lever is moved to the S position, the driver can shift the transmission manually using the steering wheel mounted paddle shifters.

GFD321670Courtesy of FORD MOTOR COMPANY
Item Description
1 Upshift +
2 Downshift -

With SelectShift™:

  • the driver can manually shift the transmission to gears 1 through 6.
  • the current gear illuminates on the IC.
  • the transmission provides additional grade (engine) braking.
  • the transmission will select gears that will provide the engine braking desired, based on the vehicle inputs, this will increase engine rpm during engine braking.

The transmission will make some shifts automatically primarily to protect the engine from stalling.

It is recommended to return to DRIVE mode on flat terrain to provide the best fuel economy and transmission function. The transmission returns to O/D when the selector lever is moved to the DRIVE position.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.