2018 Ford Fiesta STFACTORY OEM SERVICE PROCEDURE

Information System And Entertainment System DTCS: Am/Fm/Cd/Sync/Touchscreen: ACM

DTC INDEX

DTC Description Action
B1A01:01 Speaker #1: General Electrical Failure For a LHF door speaker concern, GO to Pinpoint Test H
For a LHF door tweeter speaker concern, GO to Pinpoint Test I
B1A01:11 Speaker #1: Circuit Short To Ground For a LHF door speaker concern, GO to Pinpoint Test H
For a LHF door tweeter speaker concern, GO to Pinpoint Test I
B1A01:12 Speaker #1: Circuit Short To Battery For a LHF door speaker concern, GO to Pinpoint Test H
For a LHF door tweeter speaker concern, GO to Pinpoint Test I
B1A01:13 Speaker #1: Circuit Open GO to Pinpoint Test H
B1A02:01 Speaker #2: General Electrical Failure For a RHF door speaker concern, GO to Pinpoint Test J
For a RHF door tweeter speaker concern, GO to Pinpoint Test K
B1A02:11 Speaker #2: Circuit Short To Ground For a RHF door speaker concern, GO to Pinpoint Test J
For a RHF door tweeter speaker concern, GO to Pinpoint Test K
B1A02:12 Speaker #2: Circuit Short To Battery For a RHF door speaker concern, GO to Pinpoint Test J
For a RHF door tweeter speaker concern, GO to Pinpoint Test K
B1A02:13 Speaker #2: Circuit Open GO to Pinpoint Test J
B1A03:01 Speaker #3: General Electrical Failure GO to Pinpoint Test L
B1A03:11 Speaker #3: Circuit Short To Ground GO to Pinpoint Test L
B1A03:12 Speaker #3: Circuit Short To Battery GO to Pinpoint Test L
B1A03:13 Speaker #3: Circuit Open GO to Pinpoint Test L
B1A04:01 Speaker #4: General Electrical Failure GO to Pinpoint Test M
B1A04:11 Speaker #4: Circuit Short To Ground GO to Pinpoint Test M
B1A04:12 Speaker #4: Circuit Short To Battery GO to Pinpoint Test M
B1A04:13 Speaker #4: Circuit Open GO to Pinpoint Test M
B1A56:21 Antenna: Signal Amplitude < Minimum If DTC B1A56:21 sets after running the bezel diagnostic tests, DISREGARD this DTC. This test is used for end of line or repair bay testing at the vehicle assembly plant. Each plant has its own assigned frequency and signal strength requirements. The running and passing of this test depends on local radio stations. If no local station is broadcasting on the required frequency, the test will fail.
B1A89:11 Satellite Antenna: Circuit Short To Ground For a satellite radio concern, GO to Pinpoint Test B
For a SIRIUS Travel Link concern, GO to Pinpoint Test C
For a navigation concern (if equipped), GO to Pinpoint Test Y
For a compass concern, GO to Pinpoint Test Z
B1A89:13 Satellite Antenna: Circuit Open For a satellite radio concern, GO to Pinpoint Test B
For a SIRIUS Travel Link concern, GO to Pinpoint Test C
For a navigation concern (if equipped), GO to Pinpoint Test Y
For a compass concern, GO to Pinpoint Test Z
B1D19:49 Compact Disc Unit: Internal Electronic Failure GO to Pinpoint Test V
B1D19:4B Compact Disc Unit: Over Temperature GO to Pinpoint Test V
U0155:00 Lost Communication With IPC Control Module: No Sub Type Information GO to Pinpoint Test AD
U0253:00 Lost Communication With Accessory Protocol Interface Module: No Sub Type Information GO to Pinpoint Test AH
U0256:00 Lost Communication With Front Controls Interface Module "A": No Sub Type Information GO to Pinpoint Test AI
U201A:51 Control Module Main Calibration Data: Not Programmed This DTC sets due to an incorrect or incomplete ACM configuration. Using a diagnostic scan tool, PERFORM the ACM programming procedure using as-built data. For information on as-built data, REFER to: Module Configuration - System Operation and Component Description . See As-Built Data.
U2100:00 Initial Configuration Not Complete: No Sub Type Information This DTC sets due to an incorrect or incomplete ACM configuration. Using a diagnostic scan tool, PERFORM the ACM programming procedure using as-built data. For information on as-built data, REFER to: Module Configuration - System Operation and Component Description . See As-Built Data.
U2101:00 Control Module Configuration Incompatible: No Sub Type Information This DTC sets due to an incorrect or incomplete ACM configuration. Using a diagnostic scan tool, PERFORM the ACM programming procedure using as-built data. For information on as-built data, REFER to: Module Configuration - System Operation and Component Description . See As-Built Data.
U3000:41 Control Module: General Checksum Failure CLEAR the DTC.
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U3000:41 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) .
U3000:42 Control Module: General Memory Failure CLEAR the DTC.
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U3000:42 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) .
U3000:96 Control Module: Component Internal Failure CLEAR the DTC.
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U3000:96 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to Pinpoint Test AJ
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to Pinpoint Test AK
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.