2018 Ford Explorer Base, 2.3L Eng VIN H, FWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 2.3L Eng w/Eco Boost Engine 7.30 OZS. 0.21 L MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D S
Air Cond Compressor Oil w/Eco Boost Engine 7.30 OZS. 0.21 L YN-12-D S
Air Cond Refrigerant 2.3L Eng 2.81 LBS. 1.27 KG R-134a S
Automatic Transmission Fluid 2.3L Eng 9.00 QTS. 8.51 L MOTORCRAFT Automatic Transmission Fluid MERCON LV Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. Automatic Transmission that require MERCON LV should only use MERCON LV ATF. S
Brake Fluid N/A N/A MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. Fill between "max" and "min" lines on reservoir. S
Engine Coolant 2.3L Eng w/o Oil Cooler 11.31 QTS. 10.7 L MOTORCRAFT Orange Antifreeze/Coolant Prediluted Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary. S
Engine Coolant 2.3L Eng w/Oil Cooler 11.52 QTS. 10.9 L MOTORCRAFT Orange Antifreeze/Coolant Prediluted Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary. S
Engine Oil 2.3L Eng w/Filter 5.70 QTS. 5.39 L MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil. S
Fuel Tank 18.60 GALS. 70.4 L S
Transfer Case Fluid 2.3L Eng Power Transfer Unit 0.75 QTS. 0.7 L MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant S
Windshield Washer Fluid N/A N/A MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.