Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Ford Edge SportFACTORY OEM SERVICE PROCEDURE
General Specifications
| Item | Specification |
|---|---|
| 2.0L EcoBoost without climate controlled seats - 175 amp | |
| Generator pulley ratio | 2.47 |
| Rating | 119.5 amps at 750 rpm (min) to 180 amps at 2, 500 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 2.0L EcoBoost with climate controlled seats - 200 amp | |
| Generator pulley ratio | 2.47 |
| Rating | 134 amps at 750 rpm (min) to 208 amps at 2, 500 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 2.7L EcoBoost without climate controlled seats - 175 amp | |
| Generator pulley ratio | 2.47 |
| Rating | 103.4 amps at 750 rpm (min) to 175.1 amps at 2, 500 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 2.7L EcoBoost with climate controlled seats - 200 amp | |
| Generator pulley ratio | 2.47 |
| Rating | 123.9 amps at 750 rpm (min) to 219 amps at 2, 500 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 3.5L Duratec without climate controlled seats - 175 amp | |
| Generator pulley ratio | 2.47 |
| Rating | 119.5 amps at 750 rpm (min) to 180 amps at 2, 500 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
| 3.5L Duratec with climate controlled seats - 200 amp | |
| Generator pulley ratio | 2.47 |
| Rating | 134 amps at 750 rpm (min) to 208 amps at 2, 500 rpm (max) |
| Voltage regulator type | Electronic internal with generator |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.