2017 Ford Transit Connect TitaniumFACTORY OEM SERVICE PROCEDURE

Charging System DTCS: Pcm

DTC INDEX

DTC Description Action
P0562 System Voltage Low GO to Pinpoint Test B
P0563 System Voltage High GO to Pinpoint Test A
P065B Generator Control Circuit Range/Performance GO to Pinpoint Test B
P065C Generator Mechanical Performance GO to Pinpoint Test C
P0A3B Generator Over Temperature CARRY OUT self-test of the PCM and DIAGNOSE any cooling fan Diagnostic Trouble Codes (DTCs). If no cooling fan Diagnostic Trouble Codes (DTCs) are present, INSTALL a new generator. REFER to: Generator - 2.5L Duratec (125kW/170PS) .
P1397 System Voltage Out Of Self Test Range If combined with P0562, GO to Pinpoint Test B If combined with P0563, GO to Pinpoint Test A
U012D Lost Communication With Generator Control Module GO to Pinpoint Test E
U042E Invalid Data Received From Generator Control Module GO to Pinpoint Test E
All Other DTCs - REFER to: Electronic Engine Controls .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.