2017 Ford Transit Connect TitaniumFACTORY OEM SERVICE PROCEDURE

VC Codes

WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.

VC Label Locator 

GFD148126Courtesy of FORD MOTOR COMPANY

The VC label contains the manufacturer name, the month and year of manufacture, the certification statement and the VIN. It also includes GVW and tire information. If a vehicle requires replacement of the VC label and is 4 years old or less, an authorized dealer must submit the VIN to their respective regional office. The regional office will submit a web form to the assembly plant for the replacement label. Once the label has been printed, a representative from the regional office will deliver the label to the dealer and witness installation on the vehicle. If a vehicle is more than 4 years old and requires a replacement label, the dealer must submit a request to the Department of Motor Vehicles.

GFD148127Courtesy of FORD MOTOR COMPANY
Item Description
1 Exterior paint code
2 Region code
3 District special order (DSO) code
4 Wheelbase code
5 Interior trim code
6 Tape/paint stripe code
7 Radio code
8 Axle code
9 Transmission code
10 Spring code
11 Powertrain calibration information

Paint Code 

Paint codes are listed as a 2-part code. The first set of paint code numbers/letters indicate the vehicle primary body color. The second set of letters/numbers (if applicable) indicate a 2-tone or accent body color. All paint codes are a base coat/clear coat finish.

  • BY - School Bus Yellow
  • G1 - Absolute Black
  • HI - Tectonic Silver
  • J4 - Deep Impact Blue
  • J7 - Magnetic
  • PQ - Race Red
  • S4 - Solar Yellow
  • TY - Silver Metallic
  • UV - Dark Blue
  • Z2 - Frozen White

Wheelbase Code 

The applicable wheelbase code(s) follows:

  • 105 - 105 in. (2667 mm)
  • 121 - 121 in. (3073 mm)

Interior Trim Codes 

Interior trim codes are listed as a 2-part code. The first digit listed indicates the seat and fabric style. The second digit listed indicates the interior trim color.

Trim Codes 

  • 6 - Traxon/Max cloth seats
  • 7 - Route/Max cloth seats
  • 8 - Torino leather seats
  • E - Artec/Prima vinyl seats

Interior Trim Color Codes 

  • B - Charcoal Black
  • K - Pewter
  • L - Medium Stone Gray

Tape/Paint Stripe Codes 

Tape and paint stripe codes do not apply.

Radio Codes 

The following lists available radio codes:

  • 1 - AM/ FM stereo
  • 2 - AM/ FM stereo with CD player
  • 3 - AM/ FM stereo, CD player and SDARS (Satellite Digital Audio Receiver System)
  • 4 - AM/ FM stereo, CD player and SYNC
  • 5 - AM/ FM stereo, CD player, SYNC and SDARS (Satellite Digital Audio Receiver System)
  • U - AM/ FM stereo, CD player with rear view camera
  • W - AM/ FM stereo, CD player, SYNC and rear view camera
  • X - AM/ FM stereo, CD player, SYNC, SDARS (Satellite Digital Audio Receiver System) and rear view camera
  • Y - AM/ FM stereo, CD player, SYNC, My Ford Touch, SDARS (Satellite Digital Audio Receiver System) and rear view camera

Axle Codes 

The following lists available axle ratios:

  • 3A - 3.06 ratio
  • 3C - 3.21 ratio

Transmission Codes 

Available transmissions are as follows:

  • 6 - 6-speed automatic (6F)

Spring Codes 

Spring codes are listed as a 2-part code. The first set of characters identify the front springs. The second set of characters identify the rear springs.

Front Springs 

  • Base part number - 5310

Rear Springs 

  • Base part number - 5560
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.