2017 Ford Transit Connect TitaniumFACTORY OEM SERVICE PROCEDURE

APIM Hardware Test Routine

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2016 Lincoln Navigator, 2016 Lincoln MKZ, 2016 Lincoln MKX, 2016 Lincoln MKT, and 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This test is designed to check the function of the APIM (SYNC® module) hardware only; therefore, you should only perform this test routine if directed by the Service information. It is very important that no other issues are present with systems or components that interface with the APIM.

The APIM hardware test determines whether the APIM module hardware is functioning as designed or has an identifiable issue. As each block of tests is completed, the results are provided and directions given for the next step. At the completion of the test, a recommendation is provided where the "APIM replacement IS NOT recommended" or "APIM replacement IS recommended".

Within the test routine you will notice that there may be several actions or tests that you may have performed previously in a different procedure or Pinpoint Test (PPT). However, please follow the directions provided as this test routine specifically checks the operation of the module hardware.

The tools required for this test are:

Rotunda Integrated Diagnostic Software (IDS) software

Vehicle Communication Module (VCM)

Original Multi-Media Interface Tester (MIT), 105-00120-RCA, new Multi-Media Interface Tester (MIT), 105-00120-GEN2, or equivalent  .

Fig 1: Identifying Original Multi-Media Interface Tester (105-00120-RCA) And New Multi-Media Interface Tester (105-00120-GEN2)
G08688417Courtesy of FORD MOTOR CO.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.