2017 Ford Transit Connect TitaniumFACTORY OEM SERVICE PROCEDURE

Typical Diagnostic Reference Values

Inputs Component/PID Only Measured/PID Values Units Measured/PID
KOEO Hot Idle 48 KM/H (30 MPH) 89 KM/H (55 MPH)
APP APP Sensor 0 0 18 23.5 %
APP2 APP Sensor 0.39 0.39 0.49 0.92 VOLTS
APP_MAXDIFF PID 0 0 0 -0.06 DEG
B+ PID 12.7 13-14 13-14 13-14 VOLTS
BARO PID 14.35/155.2 14.35/155.2 14.35/155.2 14.35/155.2 PSI/Hz
BOO BPP Switch OFF ON (E) OFF OFF ON/OFF
ECT ECT Sensor 3.27/105 (221) 3.51/97 (206.6) 3.9/84 (183.2) 3.78/88 (190.4) VOLTS/DEG C (DEG F)
HTRCM11 HO2S11 Sensor 1.65 1.65 1.65 1.48 AMPS
HTRCM12 HO2S12 Sensor 615 615 615 622 mA
IAT IAT Sensor 1.27/62 (143.6) 1.79/49 (120.2) 3.42/16 (60.8) 4.04/2 (35.6) VOLTS/DEG C (DEG F)
LOAD PID 0 (I) 27.45 29.41 44.31 %
LONGFT1 PID (I) -20 TO +20 -20 TO +20 -20 TO +20 %
MAP MAP Sensor 4.02/98.93/14.35/29.2 1.25/30.95/4.49/9.2 2.52/61.98/8.99/17.8 2.32/51.98/7.54/15.4 VOLTS/kPa/PSI/inHg
MISFIRE PID NO NO NO NO YES/NO
MP_LRN PID NO NO NO NO YES/NO
O2BANK1 PID VARIES VARIES VARIES VARIES RICH/LEAN
O2S11 HO2S11 Sensor (I) switching (C) switching (C) switching (C) VOLTS
O2S12 HO2S12 Sensor (I) (D) (D) (D) VOLTS
RPM CKP Sensor 0 698.3 1918 1807 RPM
SHRTFT1 PID (I) -10 TO +10 -10 TO +10 -10 TO +10 %
SYNC PID NO YES YES YES YES/NO
VSS PID 0 0 48 km/h (30 MPH) 89 km/h (55 MPH) km/h/MPH
Outputs Component/PID Only Measured/PID Values Units Measured/PID
KOEO Hot Idle 48 KM/H (30 MPH) 89 KM/H (55 MPH)
EVAPCP EVAPCP Valve OFF OFF ON ON ON/OFF
FP Fuel Pump Control Module OFF ON ON ON ON/OFF
FUELSYS PID OPEN LOOP CLOSED LOOP CLOSED LOOP CLOSED LOOP OPEN/CLOSED LOOP
HFC PID OFF ON (B) OFF OFF ON/OFF
HTR11 HO2S11 Sensor OFF ON ON ON ON/OFF
HTR12 HO2S12 Sensor OFF ON ON ON ON/OFF
IMRC IMRC Solenoid OFF ON ON ON ON/OFF
IMTV IMTV Solenoid OFF ON ON ON ON/OFF
LFC PID OFF ON (B) OFF OFF ON/OFF
SPARKADV PID 10 10.25 39 27.25 DEG
Other Component/PID Only Measured/PID Values Units Measured/PID
KOEO Hot Idle 48 KM/H (30 MPH) 89 KM/H (55 MPH)
VPWR PID 12.52 13-14 13-14 13-14 VOLTS
VREF PID 5 5 5 5 VOLTS
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.