Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Ford C-Max Hybrid TitaniumFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.20 OZS. | 0.15 L | YN-32 | S | |||
| Air Cond Refrigerant | 1.63 LBS. | 0.73 KG | R-134a | S | |||
| Automatic Transmission Fluid | 4.80 QTS. | 4.54 L | MOTORCRAFT Automatic Transmission Fluid MERCON LV | Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF. | S | ||
| Brake Fluid | N/A | N/A | MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. | Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. | S | ||
| Engine Coolant | Hybrid SE,Hybrid Titanium | 8.20 QTS. | 7.76 L | MOTORCRAFT Orange Antifreeze/Coolant Prediluted | Add the coolant type originally equipped in the vehicle. | S | |
| Engine Oil | w/Filter | 4.50 QTS. | 4.25 L | MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil | Use SAE 0W-20 or 5W-20 motor oil as a temporary replacement. | S | |
| Engine Oil | w/o Filter | 4.10 QTS. | 3.88 L | MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil | Use SAE 0W-20 or 5W-20 motor oil as a temporary replacement. | S | |
| Fuel Tank | 14.00 GALS. | 52.99 L | S | ||||
| Windshield Washer Fluid | N/A | N/A | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.