2016 Ford Transit Connect TitaniumFACTORY OEM SERVICE PROCEDURE

Engine Cooling System DTCS: 1.6L

DTC INDEX

DTC Description Action
P0125 Insufficient Coolant Temp For Closed Loop Fuel Control GO to Pinpoint Test C
P0128 Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature) GO to Pinpoint Test C
P0217 Engine Coolant Overtemperature Condition GO to Pinpoint Test B
P0480 Fan 1 Control Circuit Refer to Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid) .
P1299 Engine Coolant Overtemperature Condition Sets in the PCM when an engine overheat condition was detected. A failure mode effects management strategy called fail-safe cooling was activated to cool the engine. GO to Pinpoint Test B
P26B7 Engine Coolant Bypass Valve "C" Control Circuit/Open GO to Pinpoint Test D
P26BD Engine Coolant Bypass Valve "D" Control Circuit/Open GO to Pinpoint Test E
All Other PCM Diagnostic Trouble Codes (DTCs) - REFER to: Electronic Engine Controls - 1.6L .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.