Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Ford Transit Connect TitaniumFACTORY OEM SERVICE PROCEDURE
HVAC Control Module
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B105A:00 | Cabin Temperature Sensor Fan: No Sub Type Information | GO to Pinpoint Test E |
| B1081:00 | Left Temperature Damper Motor: No Sub Type Information | GO to Pinpoint Test N |
| B1082:00 | Right Temperature Damper Motor: No Sub Type Information | GO to Pinpoint Test G |
| B1083:00 | Recirculation Damper Motor: No Sub Type Information | GO to Pinpoint Test I |
| B1085:00 | Defroster Damper Motor: No Sub Type Information | GO to Pinpoint Test J |
| B1086:00 | Air Distribution Damper Motor: No Sub Type Information | GO to Pinpoint Test J |
| B10B3:00 | Right Panel Air Discharge Temperature: No Sub Type Information | GO to Pinpoint Test U |
| B10B4:00 | Right Floor Air Discharge Temperature: No Sub Type Information | GO to Pinpoint Test U |
| B10B5:00 | Left Panel Air Discharge Temperature: No Sub Type Information | GO to Pinpoint Test U |
| B10B6:00 | Left Floor Air Discharge Temperature: No Sub Type Information | GO to Pinpoint Test U |
| B10B8:00 | Push Buttons: No Sub Type Information | INSTALL a new HVAC control module. Refer to: Climate Control Assembly . |
| B10B9:00 | Blower Control: No Sub Type Information | GO to Pinpoint Test P |
| B1A61:00 | Cabin Temperature Sensor: No Sub Type Information | GO to Pinpoint Test E |
| B1A63:00 | Right Solar Sensor: No Sub Type Information | GO to Pinpoint Test T |
| B1A64:00 | Left Solar Sensor: No Sub Type Information | GO to Pinpoint Test T |
| B1A69:00 | Humidity Sensor: No Sub Type Information | GO to Pinpoint Test E |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test Q |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test R |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | GO to Pinpoint Test Q |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the service history for recent service actions related to the HVAC control module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure using as-built data. FOLLOW the diagnostic scan tool instructions. If there have been no recent service actions, INSTALL a new HVAC control module to correct the failure to retain configuration data. Refer to: Climate Control Assembly . |
| U2101:00 | Control Module Configuration Incompatible | CHECK the service history for recent service actions related to the HVAC control module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure using as-built data. FOLLOW the diagnostic scan tool instructions. If there have been no recent service actions, INSTALL a new HVAC control module to correct the failure to retain configuration data. Refer to: Climate Control Assembly . |
| U3000:00 | Control Module: No Sub Type Information | INSTALL a new HVAC control module. Refer to: Climate Control Assembly . |
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | GO to Pinpoint Test S |
| U3006:17 | Control Module Input Power "A": Circuit Voltage Above Threshold | GO to Pinpoint Test S |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.