2016 Ford Taurus SHOFACTORY OEM SERVICE PROCEDURE

Starting System DTCS: BCM

DTC INDEX

DTC Description Action
B1305:01 Hood Switch: General Electrical Failure REFER to Anti-Theft Perimeter .
B1319:11 Brake Shift Interlock Output Circuit Short To Ground REFER to Multifunction Electronic Modules .
B1319:15 Brake Shift Interlock Output Circuit Short To Battery or Open REFER to Multifunction Electronic Modules .
C113A:11 Wake up Control: Circuit Short to Ground GO to Pinpoint Test D .
C113A:15 Wake up Control: Circuit Short to Battery or Open GO to Pinpoint Test D .
U1000:00 Solid State Driver Protection Activated - Driver Disabled: No Sub Type Information The BCM has temporarily disabled an output because an excessive current draw exists (such as a short to ground). The BCM cannot enable the output until the cause of the short is corrected. ADDRESS all other DTCs first. After the cause of the concern is corrected, CLEAR the DTCs. REPEAT the self-test.
All Other DTCs - REFER to Multifunction Electronic Modules .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.