2016 Ford Taurus SHOFACTORY OEM SERVICE PROCEDURE

Master DTC Index

DTC INDEX

Module Reference
ABS module REFER to Anti-Lock Brake System (ABS) and Stability Control .
APIM Refer to the appropriate Information and Entertainment Systems article for the procedure.
ACM Refer to the appropriate Information and Entertainment Systems article for the procedure.
Audio DSP module REFER to Information and Entertainment Systems - Sony® Sound 8-Inch (203 mm) Touchscreen, 12 Speakers .
BCM REFER to BCM DTC Chart .
C-CM REFER to Cruise Control Non-Adaptive .
DDM REFER to Handles, Locks, Latches and Entry Systems .
DSM REFER to Seating .
DCSM REFER to Seating .
FCDIM REFER to Information and Entertainment Systems - 4.2-Inch (107 mm) Screen, 4 Or 6 Speakers .
FCIM Refer to the appropriate Information and Entertainment Systems article for the procedure.
GFM REFER to .
GPSM Refer to the appropriate Information and Entertainment Systems article for the procedure.
HVAC module REFER to Climate Control System General Information .
HUD module REFER to Cruise Control Adaptive .
HSWM REFER to Steering Column .
IPM-A REFER to Rear View Mirrors .
IPC REFER to Instrumentation, Message Center, and Warning Chimes .
OCSM REFER to Supplemental Restraint System .
PAM REFER to Parking Aid Audible .
PSCM REFER to Steering System .
PCM REFER to Electronic Engine Controls .
RFA module REFER to Remote Function Actuator (RFA) Module DTC Chart .
RCM REFER to Supplemental Restraint System .
Driver active motion seat module (SCMG) REFER to Seating .
Passenger active motion seat module (SCMH) REFER to Seating .
SOD-L REFER to Side and Rear Vision .
SOD-R REFER to Side and Rear Vision .
SCCM REFER to Steering Column Switches .
TPM module REFER to Wheels and Tires .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.