2016 Ford Fusion Energi TitaniumFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas/Electric 4.90 OZS. 0.14 L YN-32 S
Air Cond Refrigerant 2.0L Eng 1.25 LBS. 0.56 KG R-134a The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury. S
Automatic Transmission Fluid 9.00 QTS. 8.51 L MOTORCRAFT Automatic Transmission Fluid MERCON LV Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF. S
Brake Fluid N/A N/A MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. S
Engine Coolant 2.0L Eng,Gas/Electric Inverter System Controller Coolant 1.10 QTS. 1.04 L MOTORCRAFT Orange Antifreeze/Coolant Prediluted Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary. S
Engine Coolant Energi SE Luxury,Energi Titanium,2.0L Eng,Gas/Electric 8.80 QTS. 8.32 L MOTORCRAFT Orange Antifreeze/Coolant Prediluted Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary. S
Engine Oil 2.0L Eng,Gas/Electric w/Filter 4.50 QTS. 4.25 L MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil API - SAE 5W-20 Full Synthetic Motor Oil may be used if SAE 0W-20 Synthetic Blend Motor Oil is not available. S
Transfer Case Fluid Power Transfer Unit 0.37 QTS. 0.35 L MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant S
Windshield Washer Fluid N/A N/A MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.