Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module Configuration and Parameter Chart
The chart describes specific module configuration information:
| Module Name | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Progammable Parameters |
|---|---|---|---|---|
| APIM | Yes | Yes | No | None |
| ABS module | Yes | Yes | IVD initialization | None |
| ACM | Yes | Yes | No | Radio presets |
| BCM | Yes | Yes | Ambient lighting calibration Rear view camera calibration |
DRL configuration Keyless entry/passive start configuration Remote start enable/disable Trim switch enable/disable |
| CCM | Yes | Yes | No | None |
| DSP | Yes | Yes | No | None |
| DC/ DC Converter Control Module (Voltage Quality Module) | Yes | Yes | No | None |
| DDM | Yes | Yes | No | None |
| DSM | Yes | Yes | No | None |
| FCIM | Yes | Yes | No | None |
| FCDIM (4.2-inch screen) | Yes | Yes | No | None |
| SCME | Yes | Yes | No | None |
| GWM | Yes | Yes | No | None |
| GPSM | Yes | Yes | No | None |
| HUD Module | No | No | No | None |
| HSWM | Yes | Yes | No | None |
| IPMA | Yes | Yes | Camera calibration | None |
| IPC | Yes | Yes | No | Automatic engine ignition shutdown (AEIS) with override Daytime running lamps (DRLs) control function Driver Beltminder Mid-passenger Beltminder Passenger Beltminder Remote start enable/disable climate settings driver seat passenger seat rear defrost |
| OCSM | No | No | OCSM re-zero | None |
| PAM (integrated with BCM) | Yes | Yes | No | None |
| PSCM | Yes | Yes | No | None |
| PCM | No | Yes | No | None |
| PDM | Yes | Yes | No | None |
| RTM | Yes | Yes | No | None |
| RCM | Yes | Yes | No | None |
| SODL | Yes | Yes | No | Blockage enabled Enable/disable configuration |
| SODR | Yes | Yes | No | Blockage enabled Enable/disable configuration |
| SCCM | Yes | Yes | No | None |
| Tracking and Blocking System (TBS) Module (Brazil only) | Yes | Yes | No | Maintenance mode set |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.