Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Ford Fusion Energi TitaniumFACTORY OEM SERVICE PROCEDURE
Section 433 (Climate Control System): Specifications: Specifications: Material
WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification | Fill Capacity |
| Motorcraft ® PAG Refrigerant Compressor Oil YN-12-D | WSH-M1C231-B | 3.5L GTDI 220 ml (7.44 fl oz)3.5L TiVCT 250 ml (8.45 fl oz) |
| Motorcraft ® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada) | WSH-M17B19-A | 3.5L GTDI 1.11 kg (39 oz) (2.44 lb)3.5L TiVCT 1.05 kg (37 oz) (2.31 lb) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.