Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Ford Fusion Energi TitaniumFACTORY OEM SERVICE PROCEDURE
Front Controls Interface Module (FCIM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1C83:11 | Rear Defog Relay: Circuit Short to Ground | GO to Pinpoint Test B |
| B1C83:12 | Rear Defog Relay: Circuit Short to Battery | GO to Pinpoint Test A |
| B1C83:13 | Rear Defog Relay: Circuit Open | GO to Pinpoint Test A |
| B1C83:14 | Rear Defog Relay: Circuit Short To Ground or Open | If the rear window defrost system is inoperative, GO to Pinpoint Test A If the rear window defrost system does not shut off automatically, GO to Pinpoint Test B |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Climate Control System - 2.0L Duratec - Hybrid (96kW/130PS), Hybrid Electric Vehicle (HEV) . Refer to: Climate Control System - 2.0L Duratec - Hybrid (96kW/130PS), Plug-In Hybrid Electric Vehicle (PHEV) . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.