2016 Ford Escape SFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart (Except BCM and IPC)

Module Name Programmable Module Installation (PMI) Available Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Progammable Parameters
ABS module Yes Yes IVD initialization
Lateral sensor calibration
Longitudinal sensor calibration
Pressure sensor calibration
Central configuration data parameter learning		 None
APIM Yes Yes No Date format
Rear camera
ACM Yes Yes No None
DSP Yes Yes No None
DDM No Yes Window AUTO up/down functionality None
DSM No Yes No None
FCIM No Yes No None
FCDIM Yes Yes No None
GPSM (if equipped) Yes Yes No None
HCM No Yes No None
HVAC module No Yes No None
IPMB (if equipped) Yes Yes No None
OCSM No Yes Seat weight sensor re-zero None
PAM No Yes No None
PDM No No Window AUTO up/down functionality None
PSCM No Yes No None
PCM Yes Yes No None
RGTM Yes Yes No None
RFA module No Yes No None
RCM Yes Yes No None
SODL No Yes No None
SODR No Yes No None
SASM No No No None
TRM No Yes No None
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.