2015 Ford Transit-350 HD Base, Van Cargo ExtendedFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart

WARNING: This page is about a different car, the 2016 Ford Transit-350 HD, 2016 Ford Transit-350, 2016 Ford Transit-250, and 2016 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

The charts describe specific module configuration information:

Direct Configuration 

Module Name Module Address Programmable Module Installation (PMI) Available Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Progammable Parameters
APIM 7D0 Yes Yes No None
ABS module 760 Yes Yes Inertial Measurement Unit (IMU) calibration None
ACM 727 Yes Yes No None
BCM 726 Yes Yes No None
FCIM 7A7 No No No None
FCDIM 7A5 Yes Yes No None
GPSM (without touchscreen) 701 Yes Yes No None
IPC 720 Yes Yes No None
IPMA 706 Yes Yes No None
IPMB 7B1 Yes Yes No None
PAM 736 No No No None
PCM 7E0 Yes Yes Yes VIN
RCM 737 Yes Yes No None
SASM 797 No No No None
TBM 757 No No No None
TRM 791 Yes Yes No None
TCM (diesel engine) 7E1 Yes Yes No None

Body Control Module (BCM) and Instrument Panel Cluster (IPC) Car Configuration 

NOTE: The BCM and IPC have a unique procedure to set Car Configuration Parameters. Configuration changes made will affect several modules. If the car configuration is changed in the BCM or IPC, an adaptive learning of the car configuration may be required in some modules (such as ABS module or RCM), depending on the changed parameter.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.