Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Emission Recall 16E05 - 3.5L ECOBOOST Engine - Powertrain Control Module Reprogramming (16E05)
Reference number: 16E05
EMISSION RECALL 16E05 - 3.5L ECOBOOST ENGINE - POWERTRAIN CONTROL MODULE REPROGRAMMING
SERVICE CAMPAIGN BULLETIN
| FORD: | 2014-2015 Transit |
EMISSION RECALL 16E05
SUBJECT
Emission Recall 16E05
Certain 2014 - 2015 Model Year Transit Vehicles Equipped with a 3.5L Ecoboost Engine
Powertrain Control Module Reprogramming
AFFECTED VEHICLES
| Vehicle | Model Year | Assembly Plant | Build Dates |
|---|---|---|---|
| Transit | 2014-2015 | Kansas City | October 7, 2013 through December 2, 2014 |
Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS EMISSION RECALL
Under certain conditions, the service engine soon indicator will not illuminate when some emissions monitors detect that a system fault is present.
SERVICE ACTION
Dealers are to reprogram the Powertrain Control Module (PCM) software using Integrated Diagnostic Software (IDS) release 103.01 or higher. This service must be performed at no charge to the vehicle owner.
OWNER NOTIFICATION MAILING SCHEDULE
Pending Agency approval, owner letters are expected to be mailed the week of February 13, 2017. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
PLEASE NOTE:
The sale of uncorrected new vehicles to customers could lead to penalties under applicable state and Federal regulations. Correct all vehicles in your new vehicle inventory prior to delivery.
ATTACHMENTS
- Attachment I: Administrative Information
- Attachment II: Labor Allowances and Parts Ordering Information
- Attachment III: Technical Information
- Owner Notification Letter
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.
Sincerely,
Michael A. Berardi
ATTACHMENT I
Emission Recall 16E05
Certain 2014 - 2015 Model Year Transit Vehicles Equipped with a 3.5L Ecoboost Engine
Powertrain Control Module Reprogramming
OASIS ACTIVATION
OASIS will be activated on December 1, 2016.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com by December 1, 2016. Owner names and addresses will be available by February 24, 2017.
SOLD VEHICLES
- Owners of affected vehicles will be directed to dealers for repairs.
- Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
- Correct other affected vehicles identified in OASIS which are brought to your dealership.
- Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.
STOCK VEHICLES
- Use OASIS to identify and correct all affected vehicles in your new and used vehicle inventory.
TITLE BRANDED/SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this recall.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
- For vehicles within new vehicle bumper-to-bumper warranty coverage, follow existing warranty and policy guidelines for related damage claims. No SSSC approval is required for these vehicles:
- Ford vehicles - 3 years or 36,000 miles
- For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval Request to the SSSC Web Contact Site prior to completing the repair.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
The use of rental vehicles is not approved for this program.
CLAIMS PREPARATION AND SUBMISSION
- Enter claims using Direct Warranty Entry (DWE) or One Warranty Solution (OWS).
- DWE: refer to ACESII manual for claims preparation and submission information.
- OWS: when entering claims in DMS software, select claim type 31: Field Service Action. The FSA number (16E05) is the sub code.
- Additional labor and/or parts must be claimed as related damage on a separate repair line from the FSA.
ATTACHMENT II
Emission Recall 16E05
Certain 2014 - 2015 Model Year Transit Vehicles Equipped with a 3.5L Ecoboost Engine
Powertrain Control Module Reprogramming
LABOR ALLOWANCES
| Description | Labor Operation | Labor Time |
|---|---|---|
| Reprogram PCM using IDS release 103.01 or higher | 16E05B | 0.3 Hours |
PARTS REQUIREMENTS/ORDERING INFORMATION
Parts are not required to complete this repair.
ATTACHMENT III
EMISSIONS PROGRAM 16E05
CERTAIN 2015 MODEL YEAR TRANSIT VEHICLES EQUIPPED WITH A 3.5 ECOBOOST ENGINE - POWERTRAIN CONTROL MODULE REPROGRAMMING
OVERVIEW
Under certain conditions, the service engine soon indicator will not illuminate when some emissions monitors detect that a system fault is present. Dealers are to reprogram the Powertrain Control Module (PCM) software using Integrated Diagnostic Software (IDS) release 103.01 or higher.
SERVICE PROCEDURE
Module Reprogramming
- Reprogram the PCM using IDS release 103.01 or higher.NOTE: Calibration files may also be obtained at www.motorcraftservice.com.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
