Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Ford Taurus SHOFACTORY OEM SERVICE PROCEDURE
Powertrain Control Module (PCM)
DTCINDEX
| DTC | Description | Action |
|---|---|---|
| P0457 | Evaporative Emission System Leak Detected (fuel cap loose/off) | REFER to ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) |
| P0460 | Fuel Level Sensor A Circuit | REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) first. If sent here from an Engine Controls article, GO to Pinpoint Test B for single sender L-shaped fuel tank or GO to Pinpoint Test C for dual sender saddle-type fuel tank. |
| P0461 | Fuel Level Sensor A Circuit Range/Performance | REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) first. If sent here from an Engine Controls article, GO to Pinpoint Test B for single sender L-shaped fuel tank or GO to Pinpoint Test C for dual sender saddle-type fuel tank. |
| P0462 | Fuel Level Sensor A Circuit Low | REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) first. If sent here from an Engine Controls article, GO to Pinpoint Test B for single sender L-shaped fuel tank or GO to Pinpoint Test C for dual sender saddle-type fuel tank. |
| P0463 | Fuel Level Sensor A Circuit High | REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) first. If sent here from an Engine Controls article, GO to Pinpoint Test B for single sender L-shaped fuel tank or GO to Pinpoint Test C for dual sender saddle-type fuel tank. |
| P1678 | Low Oil Pressure Lamp Control Circuit | GO to Pinpoint Test AH . |
| P2065 | Fuel Level Sensor B Circuit | REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) first. If sent here from an Engine Controls article, GO to Pinpoint Test C . |
| P2066 | Fuel Level Sensor B Circuit Range/Performance | REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) first. If sent here from an Engine Controls article, GO to Pinpoint Test C . |
| P2067 | Fuel Level Sensor B Circuit Low | REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) first. If sent here from an Engine Controls article, GO to Pinpoint Test C . |
| P2068 | Fuel Level Sensor B Circuit High | REFER to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) first. If sent here from an Engine Controls article, GO to Pinpoint Test C . |
| All Other DTCs | - | REFER to Multifunction Electronic Modules . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.