2014 Ford Taurus SHOFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart

The chart describes specific module configuration information:



Module Module Address Requires PMI Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
ABS module 760 Yes Yes
  • ABS lock to lock test
 None
Accessory Protocol Interface Module (APIM) 7D0 Yes Yes
  • APIM  speaker
  • APIM  ID
  • APIM  precondition
  • APIM  provisioning
 None
Audio Front Control Module (ACM) 727 Yes Yes No None
Body Control Module (BCM) 726 Yes Yes No
  • Automatic Engine Idle Shutdown (AEIS) enable (pushbutton start only)
  • Daytime running lamps type
  • Locking horn feedback (non Police package)
  • Locking light feedback
  • Trunk release present (RKE  )
  • Tire placard pressure
  • Tire size
Audio Digital Signal Processing (DSP) module 783 Yes Yes No None
Cruise-Control Module (C-CM) 764 Yes Yes No None
Driver Door Module (DDM) 740 Yes Yes No None
Driver Seat Module (DSM) 744 Yes Yes No
  • Easy entry/easy exit present
Dual Climate Controlled Seat Module (DCSM) 776 Yes Yes No None
Front Controls Interface Module (FCIM) 7A7 No No No None
Front Control/Display Interface Module (FCDIM) 7A5 Yes Yes No None
Generic Function Module (GFM) (Police package) 7A1 No No No None
Global Positioning System Module (GPSM) 701 Yes Yes No None
Head Up Display (HUD) module 7B2 No No No None
Heated Steering Wheel Module (HSWM) 714 Yes Yes No None
HVAC module 733 Yes Yes No None
Image Processing Module - A (IPM-A) 706 Yes Yes
  • Camera alignment
 None
Instrument Panel Cluster (IPC) 720 Yes Yes
  • Compass zone test
  • AEIS disable (one key cycle) (pushbutton start only)
Occupant Classification System Module (OCSM) 765 No No
  • Seat weight sensor re-zero
 None
Parking Aid Module (PAM) 736 Yes Yes No None
PCM 7E0 Yes Yes
  • Adaptive airflow
  • Idle speed
  • Refueling event
  • Fuel trim
 None
Power Steering Control Module (PSCM) 730 Yes Yes No None
Restraints Control Module (RCM) 737 Yes Yes
  • Seat weight sensor re-zero
  • Emergency call present
  • Driver Belt-Minder®
  • Passenger Belt-Minder®
Remote Function Actuator (RFA) module 731 Yes Yes No
  • Auto locking
  • Auto unlocking
  • Passive entry/passive start enable configuration
  • Unlock sequence
Side Obstacle Detection Control Module - Left (SOD-L) 7C6 Yes Yes No
  • BLIS®  enable/disable
  • CTA  enable/disable configuration
Side Obstacle Detection Control Module - Right (SOD-R) 7C6 Yes Yes No
  • BLIS®  enable/disable
  • CTA  enable/disable configuration
Steering Column Control Module (SCCM) 724 Yes Yes No None
Tire Pressure Monitor (TPM) Module 751 No No No None
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.