Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Ford Fusion Titanium, FWDFACTORY OEM SERVICE PROCEDURE
Section 249 (Front Suspension): Specifications
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Silicone Spray Lubricant XL-6 |
ESR-M13P4-A | - |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brake caliper anchor plate bolts | 115 | 85 | - |
| Brake disc shield bolts | 20 | - | 177 |
| Brake hose bracket bolt | 20 | - | 177 |
| Lower arm forward bolt | 205 | 151 | - |
| Lower arm rearward nuts | 185 | 136 | - |
| Lower ball joint nut | 115 | 85 | - |
| Stabilizer bar bracket nuts | 70 | 52 | - |
| Stabilizer bar link nuts | 115 | 85 | - |
| Steering gear bolts | 115 | 85 | - |
| Strut rod nut | 103 | 76 | - |
| Strut rod nut (GT500) | 80 | 59 | - |
| Strut-to-spindle bolts | 225 | 166 | - |
| Strut upper mount nuts | 35 | 26 | - |
| Tie-rod end nuts | 80 | 59 | - |
| Wheel hub nut | 340 | 251 | - |
| Wheel speed sensor bolt | 15 | - | 133 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.