2014 Ford Fusion Titanium, AWDFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart

WARNING: This page is about a different car, the 2013 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The chart describes specific module configuration information:

Module Name Programmable Module Installation (PMI) Available Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Progammable Parameters
APIM  Yes Yes No None
ABS  module Yes Yes
  • IVD initialization
 None
ACM  Yes Yes No
  • Radio presets
BCM  Yes Yes
  • Ambient lighting calibration
  • Rear view camera calibration
  • DRL  configuration
  • Remote start enable/disable
  • Trim switch enable/disable
CCM  Yes Yes No None
DSP  Yes Yes No None
DC  /DC  Converter Control Module (Voltage Quality Module) Yes Yes No None
DDM  Yes Yes No None
DSM  Yes Yes No None
FCIM  Yes Yes No None
FCDIM  (4.2-inch screen) Yes Yes No None
GWM  Yes Yes No None
GPSM  Yes Yes No None
HUD  Module No No No None
IPMA  Yes Yes
  • Camera calibration
 None
IPC  Yes Yes No
  • Automatic engine ignition shutdown (AEIS) with override
  • Driver Beltminder
  • Mid-passenger Beltminder
  • Passenger Beltminder
  • Remote start enable/disable climate settings driver seat passenger seat rear defrost
OCSM  No No
  • OCSM  re-zero
 None
PAM  (integrated with BCM  ) Yes Yes No None
PSCM  Yes Yes No None
PCM  No Yes No None
PDM  Yes Yes No None
RTM  Yes Yes No None
RCM  Yes Yes No None
SODL  Yes Yes No
  • Blockage enabled
  • Enable/disable configuration
SODR  Yes Yes No
  • Blockage enabled
  • Enable/disable configuration
SCCM  Yes Yes No None
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.