Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module Configuration and Parameter Chart
The chart describes specific module configuration information:
| Module Name | Module Address | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Programmable Parameters |
|---|---|---|---|---|---|
| APIM | 7D0 | Yes | Yes | No | None |
| ABS module | 760 | Yes | Yes | IVD initialization EPB apply and release |
Trailer sway assist |
| ACM | 727 | Yes | Yes | No | None |
| BCM | 726 | Yes | Yes | Ambient lighting calibration Rear view camera calibration |
Remote start enable/disable Perimeter alarm Tire pressure |
| CCM | 764 | Yes | Yes | Radar horizontal and vertical alignment calibration | None |
| DSP | 783 | Yes | Yes | No | None |
| DACMC (integrated with ACM) | 7D5 | Yes | Yes | No | None |
| DC/ DC converter control module (Voltage Quality Module [VQM]) | 746 | Yes | Yes | No | None |
| DDM | 740 | Yes | Yes | Windows initialization | None |
| DSM | 744 | Yes | Yes | No | None |
| SCME | 776 | Yes | Yes | No | None |
| FCDIM | 7A5 | Yes | Yes | No | None |
| FCIM | 7A7 | Yes | Yes | No | None |
| GWM | 716 | Yes | Yes | No | None |
| GPSM | 701 | Yes | Yes | No | None |
| HUD module | 7B2 | No | No | No | None |
| HSWM | 714 | Yes | Yes | No | None |
| IPC | 720 | Yes | Yes | No | Daytime running lamps control function Remote start feature Remote start - climate settings Driver seat Passenger seat Rear defrost Steering wheel |
| IPMA | 706 | Yes | Yes | Camera calibration | None |
| IPMB | 7B1 | Yes | Yes | Camera calibration | None |
| OCSM | 765 | No | No | OCSM re-zero | None |
| PAM (integrated with BCM) | 736 | Yes | Yes | No | None |
| PSCM | 730 | Yes | Yes | No | None |
| PCM | 7E0 | Yes | Yes | Misfire Monitor Neutral Profile Correction procedure | None |
| PDM | 741 | Yes | Yes | Windows initialization | None |
| RTM | 751 | Yes | Yes | No | None |
| RGTM | 775 | No | No | No | None |
| RCM | 737 | Yes | Yes | No | None |
| SODL | 7C4 | Yes | Yes | No | BLIS/CTA enable/disable Blockage enable/disable |
| SODR | 7C6 | Yes | Yes | No | BLIS/CTA enable/disable Blockage enable/disable |
| SASM | 797 | Yes | Yes | Adaptive steering wheel angle sensor trim adjustment | None |
| SECM | 7C5 | Yes | Yes | Adaptive steering wheel angle sensor trim adjustment Actuator trim procedure |
None |
| SCCM | 724 | Yes | Yes | No | None |
| TRM | 791 | Yes | Yes | No | None |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.