Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Ford Fusion Energi TitaniumFACTORY OEM SERVICE PROCEDURE
Gateway Module (GWM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT the Programmable Module Installation (PMI) procedure as directed by the diagnostic scan tool. If there have been no recent service actions, INSTALL a new GWM. REFER to: GATEWAY MODULE A (GWM) . |
| U3000:44 | Control Module: Data Memory Failure | RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:44 is retrieved, INSTALL a new GWM. REFER to: GATEWAY MODULE A (GWM) . If DTC U3000:44 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |
| U3000:45 | Control Module: Program Memory Failure | RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:45 is retrieved, INSTALL a new GWM. REFER to: GATEWAY MODULE A (GWM) . If DTC U3000:45 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |
| U3000:49 | Control Module: Internal Electronic Failure | RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:49 is retrieved, INSTALL a new GWM. REFER to: GATEWAY MODULE A (GWM) . If DTC U3000:49 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.